Tel:800 857 4650
Positions:ProductsPot MagnetSWNE

SWNE

Material  code Remanence Coercivity Intrinsic
Max.Energy Product (BH)max Max Working  Temp 
Coercivity
Br Hcb Hcj
Kg T KOe KA/m KOe KA/m MGOe KJ/m3
typ. min. typ. min. typ. min. typ. min. typ. min. typ. min.
N27 10.6 10.2 1.06 1.02 10.5 9.6 836 765 12 955 27 25 215 199 80
N30 11.2 10.8 1.12 1.08 10.5 9.8 836 780 12 955 30 28 239 223 80
N33 11.6 11.3 1.16 1.13 11.0 10.3 876 820 12 955 33 31 263 247 80
N35 12.1 11.7 1.21 1.17 11.2 10.8 892 860 12 955 35 33 279 263 80
N37 12.4 12.0 1.24 1.2 11.5 10.8 915 860 12 955 37 35 295 279 80
N40 12.9 12.5 1.29 1.25 11.5 10.6 915 844 12 955 40 38 318 303 80
N43 13.3 13.0 1.33 1.3 10.5 10.0 836 796 11 876 43 41 342 326 80
N45 13.7 13.3 1.37 1.33 10.5 10.0 836 796 11 876 45 43 350 342 80
N30M 11.2 10.8 1.12 1.08 10.5 9.8 836 780 14 1114 30 28 239 223 100
N33M 11.7 11.3 1.17 1.13 11.0 10.3 876 820 14 1114 33 31 263 247 100
N35M 12.1 11.7 1.21 1.17 11.2 10.8 892 860 14 1114 35 33 279 263 100
N37M 12.4 12.0 1.24 1.20 11.5 10.8 915 860 14 1114 37 35 295 279 100
N40M 12.9 12.5 1.29 1.25 11.5 10.6 915 844 14 1114 40 38 318 303 100
N27H 10.6 10.2 1.06 1.02 10.5 9.6 836 765 17 1353 27 25 215 199 120
N30H 11.2 10.8 1.12 1.08 10.5 9.8 836 780 17 1353 30 28 239 223 120
N32H 11.5 11.2 1.15 1.12 11.0 10.3 876 820 17 1353 32 30 255 239 120
N35H 12.1 11.7 1.21 1.17 11.2 10.8 892 860 17 1353 35 33 279 263 120
N37H 12.4 12.0 1.24 1.20 11.5 10.8 915 860 17 1353 37 35 295 279 120
N40H 12.9 12.5 1.29 1.25 11.5 10.6 915 844 17 1353 40 38 318 303 120
N27SH 10.6 10.2 1.06 1.02 10.5 9.6 836 765 20 1595 27 25 215 199 150
N30SH 11.2 10.8 1.12 1.08 10.5 9.8 836 780 20 1595 30 28 239 223 150
N32SH 11.5 11.2 1.15 1.12 11.0 10.3 876 820 20 1595 32 30 255 239 150
N35SH 12.1 11.7 1.21 1.17 11.2 10.8 892 860 20 1595 35 33 279 263 150
N25UH 10.2 9.7 1.02 0.97 9.6 9.4 764 748 24 1910 25 23 199 183 160
N28UH 10.8 10.4 1.08 1.04 10.2 9.8 812 780 24 1910 28 26 223 207 160
N30UH 11.2 10.8 1.12 1.08 10.6 10.1 844 804 24 1910 30 28 239 223 160

Remark:
1. MAX.Working Temperature is only for reference,depending on the circuit which the magnet is applications.
2. When L/D ratio of testing piece is eaqual to 0.7,the open flux irreversible loss at Max.Working Temperature less/eaqual 5% is guaranteed.(Lmeans magnetization direction length,D means diameter of magnetic pole surface.)
3. Users are recommended to consult us on any application involving temperature near to 150.

Remark:
1. All dimension is in millimeter.
2. Magnets can be machened as per customersrequirements.

Copyright ® China NingBo Souwest Magnetech Development Co.,Ltd All Rights Reserved By yc-seo Network Inc Rss site map
Hot Products: Magnetic Material , Magnetic Separator , Magnetic Assemblies , Magnetic Products , Bullet Magnet